Regulation
What the Energy Performance in Buildings Regulation (Binalarda Enerji Performansı Yönetmeliği) brings to HVAC
The regulation concerns air conditioning systems not only at the design stage but…
We build the most efficient and comfortable environment
See our services →One partner for all climate systems.
Comfort is no accident;
it is calculated, measured and designed.
We design, supply and install air conditioning, ventilation, heating and cooling systems. They all have one thing in common: none of them is improvised on site.
About
No equipment is selected without calculation.
No equipment is selected without a calculation
No equipment capacity is set without a heating and cooling load calculation. A wrongly selected unit ruins both comfort and the energy bill from the first day.
Handover is complete only with user training
If the installed system is not used correctly, both comfort and savings stay on paper. At handover we explain correct use of the system to the user; we train informed users in temperature setting, mode selection, filter cleaning and energy saving.
Comfort is something measurable
Temperature alone is not comfort. Relative humidity, fresh air volume, air velocity and noise are assessed together.
Not the initial investment, but ten years of cost
When we recommend equipment we do not calculate the purchase price; we calculate energy consumption, spare part availability and maintenance cost together.
Where weWork
From Ataşehir to Conakry — the systems we designed, supplied and installed are still running in the field today.
Our services
Measurement Services
Kyoto Engineering follows technology closely and has a broad technical infrastructure able to answer a wide range of requirements.
Engineering and Design
With its specialised engineers, Kyoto Engineering provides every kind of engineering service and supplies the right products.
Service and Installation
With its experienced technical and site personnel, Kyoto Engineering makes the difference in execution.
VRF Air Conditioning Systems
Independent temperature control in every space and low operating cost with variable refrigerant flow systems.
Chillers and Cooling Plants
Central cooling solutions with air cooled and water cooled chillers, cooling towers and pump sets.
Air Handling Units and Ventilation
We make indoor air quality measurable through fresh air, heat recovery, ductwork and air distribution.
Heat Pump Systems
Meeting heating, cooling and hot water demand from a single system with air source and ground source heat pumps.
Central Heating and Boiler Rooms
Installation of central heating plant with condensing boilers, cascade systems, cylinders and pump sets.
Underfloor Heating and Radiant Systems
Underfloor heating and radiant panel applications that operate at low temperature and distribute heat evenly.
Cleanroom and Hospital Air Conditioning
Pressure cascaded, HEPA filtered systems for operating theatres, intensive care units, laboratories and production cleanrooms.
Automation and Building Management
Monitoring and controlling all mechanical systems from a single point and reporting energy consumption.
Mechanical Systems Design
Detailed design for heating, cooling, ventilation, plumbing and fire protection, together with site survey and quantity take-off.
Maintenance, Service and Operation
We extend system life with periodic maintenance, 24/7 breakdown service and contracted operational support.
Energy Efficiency and Retrofit
Measurement based analysis of the existing installation, improvement proposals and implementation prioritised by payback period.References
A selection of our references.
From airports to sports facilities, from showrooms to residential projects, we have worked on buildings of every scale and use.
Conakry Ahmed Sékou Touré Airport
Passenger terminals are high-ceilinged, extensively glazed spaces whose occupancy changes rapidly through the day. In such buildings the cooling load is calculated for the peak hours; air distribution is planned to deliver the same comfort at every point in the terminal. In a tropical climate, humidity control is as decisive as temperature.
Tema World İstanbul
In mixed-use projects the residential, office and retail areas within the same building have different operating hours and different comfort expectations. The system is arranged so that each section can be controlled independently while the shared infrastructure is used efficiently.
Habaş Maltepe Office and Showroom
On the office floors, independent floor-by-floor control and quiet operation come first. On the showroom side, the heat gain through the wide glazed façade and the visitor numbers that change through the day are taken into account; the two parts of the same building call for different solutions.
Lynk & Co. Automotive
The automotive showroom and service areas are combined in a single building. In the display area comfort and quiet are decisive, on the service side exhaust extraction and a high air change rate. The pressure balance between the two volumes keeps odours from reaching the display area.
Eyüpspor Kemerburgaz Facilities
In sports facilities the fresh air required per person is markedly above normal use. In changing rooms and showers moisture extraction is essential, while in the hall the air velocity must be kept at a level that does not disturb the athletes.
Ebebek Maltepe
In retail stores the air curtain at the entrance prevents the internal temperature escaping every time the door opens. The internal heat gain from lighting and visitor numbers is calculated separately according to the size of the store.
Artaş Şişli Residential Project
In residential projects, independent control for each apartment and a low noise level come first. The air conditioning of the common areas and the systems inside the apartments are designed separately; because the running cost falls on the occupant for years, efficiency is calculated from the outset.Insights
Regulations, technical notes and field experience.
In our archive we explain, in plain language, the regulations that affect your building and the problems we meet most often on site.
Regulation
F-Gas regulations and the refrigerant transition: from R410A to R32
Refrigerants are going through the most decisive change the air conditioning sector has…
Regulation
Periodic maintenance of ventilation and air conditioning systems: who, how often, documented how?
Maintenance is not a document to be shown at an inspection; it is the only proof that…
FAQ
Frequently asked
If you cannot find what you are looking for, just ask — our technical team will answer.
What information should I prepare in order to get a quotation?
Room dimensions or architectural drawings, how the building is used, occupancy density, details of any existing system and the last three months' energy bills are enough for a first assessment. If you do not have this information, we establish it during a site visit.
Is the site visit chargeable?
For İstanbul and the neighbouring provinces the first site visit is free of charge. Measurements, surveys or preliminary design work are priced separately; if the job is awarded to us, that amount is deducted from the contract.
How soon does the quotation arrive?
For work of standard scope, within a short time; for projects that require a site visit or calculations, we send the written quotation after the visit.
Do you work on a turnkey basis?
We work in both models. On turnkey contracts the design, material procurement, installation, testing and commissioning are ours. You can also commission the installation alone or the design alone.
Can I commission the design only?
Yes. Mechanical services design can be commissioned independently of the installation. In that case we also give site support to the company carrying out the work.
Do you work throughout Türkiye?
Yes. Our head office is in İstanbul; we have a service network in 26 provinces. On project work our teams are stationed on site for the duration of the job. For distant locations, mobilisation is shown as a separate item in the quotation.